MICROTOME SYSTEM

TEC 3000 Wax Trimmer

 The TEC-300 Wax Trimmer is a practical and safe device designed to remove excess paraffin from  the embedding cassettes after inclusion of specimens. Scraping the embedded block on the ”grooved” plane heated surface,  excess paraffin will be removed leaving the cassette clean ready to be set properly on the clamp of the microtome.

ARM 3600 Fully Automated Microtome

Histo Line ARM 3600 is Fully Automatic Motorized rotary microtome, designed for routine and research in histology and research laboratories. The section thickness is selectable between 0.25 and 60 µm.

Trimming, slice’s thickness can be easily set through the control board.
The cutting and trimming function can be finished by the control system.
The hand wheel can be locked at any position, so as to ensure the safety of the operation.
The large waste tray can be Exchanged arbitrarily.
Two kinds of the specimen clamp can be changed conveniently, and it has the alarm system.
Two model for section: Manual and automatic, the user can switch arbitrarily.
Four speed of section: 25 circle/minute, 35 circle/minute, 45 circle/minute, 55 circle/minute.
Switch arbitrarily between section and trimming.

MRS3500 

Histo Line MRS 3500 is a Ultra-Thin, Semi-Automatic Motorized rotary microtome, designed for routine and research in histology and research laboratories. The section thickness is selectable between 0.25 and 60 µm. Trimming, slice’s thickness can be easily set through the control board.
The LCD display gives all information. The MRS 500 is supplied with a complete package of accessories:

• Blade Holder for High and low Profile Disposable Blades Knife Holder N Assembly for Steel Knifes
• 3-Axis Orientation Attachment for Clamp
• Universal Cassette Clamp with Adapter
• Waste Tray
• Specimen Clamp 

Rotari Microtome  MR2258

Histo Line MR2258 a rotary microtome, designed for routine and research in histology and research laboratories. The section thickness is selectable between 0.5 and 60 µm. The MR2258 is supplied with a complete package of accessories:

• Blade Holder for High and low Profile Disposable Blades
• Knife Holder N Assembly for Steel Knifes
• 3-Axis Orientation Attachment for Clamp
• Universal Cassette Clamp with Adapter
• Waste Tray
• Specimen Clamp 

MC5000 Semiautomatic Rotary Microtome

Histo Line MC 5000   is a semiautomatic rotary microtome cryostat , dual freezing system with UVC lamp decontamination and automatic defrosting. MC 5000 is provided with disposable blade holder  , anti roll device and adjustable cutting angle. Easy to operate, all function are settable through keyboard. The motorized coarse feed control is accessible through a separate control panel.



MC4000 Microtome Cryostat

Histo Line MC 4000 is a semiautomatic rotary microtome cryostat , dual compressor with UVC lamp decontamination and automatic defrosting. MC 4000 is provided with disposable blade holder cooled with separate freezing circuit , anti roll device and adjustable cutting angle. Easy to operate, all function are settable through keyboard. The motorized coarse feed control is accessible through a separate control panel.



TEC 2602 Water Bath

TEC 2602 Water Bath is designed for flattening tissue sections, the not reflecting mat black surface is made in aluminum for temperature stability and quick heat up.
The temperature is microprocessor controlled to guarantee an exact regulation. The digital display allows to set and control the required temperature.

TEC 2601 Slide Drier  

TEC 2601 Slide Drier is designed for stretching an drying of cut tissue samples, the not reflecting mat black working surface is made in aluminium for high temperature stability and quick heat up. The temperature is microprocessor controlled to guarantee an exact regulation. The digital display allows to set and control the required temperature.



TEC 2500 Water Bath-Slide Drier

TEC 2500 Water Bath – Slide Drier All in One , is composed in three areas, Water Flattening Bath, Slide Drying Bench and Multipurpose Tray that can be used for drying and warming slides. All functions are settable trough the control panel: Temperature of Water Bath, Drying Bench and Thermal Tray.



TEC 2800 Cryo Console

TEC 2800 CRYO CONSOLE is composed of a compressor cooled work surface held to chill the paraffin blocks rapidly. The Teflon coated surface allows a minimum ice formation and easy cleaning. Temperature is adjustable from ambient to -13°C increment in 1°C. TEC 2800 CRYO CONSOLE can be used as a stand alone unit near the microtome station.